smartBridges Logo
Products
Products Summary
Backhauls & Access Points
sB3215V [2.3 - 2.5 GHz]
sB3216V [4.8 - 5.9 GHz]
Customer Premise Equipment
sB3417 [2.3 - 2.5 GHz]
Element Managment Systems
Accessories

 

 


Print Ready | Email Article

PoEI Adaptor, 18 Watts [sB2842]

The PoEI Adaptor (18 Watts) [Model No: sB2842] is shipped as a standard accessory with the following smartBridges radios:

This POE injector comes with an integrated AC Adapter and employs a "remote reset" switch, enabling the user to reset an outdoor radio 100 meters away. Pressing the Reset Button for 15 seconds will hardware reset the remote mounted radio device. This convenient feature eliminates the need for a cumbersome climb to the roof or tower to reset the radio. It is recommended to place the PoE Injector indoors close to the user computer.


[sB2842]

For better noise reduction, the shielded RJ45 jack permits the use of a shielded Ethernet cable.


Features at a Glance

Protection

  • Ethernet port protection against Surge Voltage with integrated Surge Suppression Circuit
  • Two-layered protection for data I/O and power lines

Advanced Diagnostics

  • Reset switch 100 meters away from outdoor device

Carrier Class

  • Shielded RJ45 permits use of shielded Ethernet cables

PoEI Adaptor, 18 Watts [sB2842] Technical Specifications

INPUT

Voltage

AC 100 to 250V +/- 10%

Line Frequency Range

47 to 63Hz
OUTPUT

Voltage

+48Vdc Typical, 44V to 57V

Output Current

0.4A Max
Transient Response

0.5 msec for 50% load change typical

Ripple and Noise Power feeding ripple and noise: (IEEE 802.3af 33.2.8.3)
f < 500Hz 500mVp-p
500Hz to 150kHz 200mVp-p
150kHz to 500kHz 150mVp-p
500kHz to 1MHz 100mVp-p
Pin Assignments
SAFETY APPROVALS

Agency Listings

TUV/IEC EN60950-1
EMC: EN55022 / 55024 / 61000
PROTECTION

ESD

+/-10kV Max

EMI

Complies with EMC Directive
ENVIRONMENTAL
Operating Temperature +32ºF to +104ºF (0ºC to +40ºC)
Storage Temperature -22ºF to +185ºF (-30ºC to +85ºC)
Relative Humidity 5% to 95% non-condensing humidity
MECHANICAL
Dimension 4.25" x 2.62 " x 1.52 " (108 x 66.5 x 38.6 mm)
Unit Weight 0.44 lbs (0.2 kg)
Cords and Connectors Shield Type Dual RJ45 Jacks built into the enclosure

Back to top

Buy this product

Enquire about this product

Successful deployment stories

Last updated on Thursday, June 12, 2008

 

  © 1999-2008 smartBridges. All rights reserved. Privacy & Terms of Use