smartBridges :: Wireless Network Products

Products Summary
Backhauls & Access Points
	sB3215V [2.3 - 2.5 GHz]
	sB3216V [4.8 - 5.9 GHz]
Customer Premise Equipment
	sB3415 [2.3 - 2.5 GHz]
	sB3416 [4.8 - 5.9 GHz]
	sB3417 [2.3 - 2.5 GHz]
Element Managment Systems
Accessories

Print Ready | Email Article

airClient™ TOTAL 241

Product Overview | Features & Benefits | Application Scenarios | Tech Specs | Download Brochure

Product Overview

airClient TOTAL 241 is smartBridges answer to customer's demand for a rugged outdoor customer premise equipment. sB3415-03 operates in the license free 2.4GHz and provides up to 6 Mbps of data throughput. sB3415-03 can also be used in PtP mode backhaul application.

It comes with a built-in innovative high gain antenna, which can provide a range of up to 6 miles (10 km). Alternatively, the N Connector on the equipment gives customers added flexibility to control radiation pattern and increase range by using an external antenna. To manage the customer SLA, the radio supports BW management for wired and wireless interface. To reduce the jitter and delays for sensitive applications like voice, video radio supports 8 configurable priority queues.

The airClient TOTAL 241 has extensive network management and networking software features such as Network Address Translation (NAT) and Router capabilities to isolate the user's service provider network while the MAC based bandwidth control provides an additional security.

[sB3415]

Summary of airClient TOTAL 241 features and benefits

Features	Benefits
OFDM Radio	Near Line of Sight operation and resistance to multi-path delays
CPE with integrated antenna	Lower overall cost and fastest installation
External Antenna Support	N Connector allows use of external antenna for more flexibility
Bandwidth Control at CPE	Controls upstream/downstream bandwidth for each user according to Service Level Agreement (SLA)
Data Security (64/128 bit WEP, TKIP/RC4)	Standardized security options. Advanced AES security.
Comprehensive Network Features	Built-in NAT and Routing function to isolate service provider’s network from customer’s network
Unified Web and SNMP MIB-II compliant remote management interface	Permits best in the class remote control, maintenance and firmware upgrade of equipment for reliable networks

Application Scenario

The purpose built rugged hardware and design makes the wireless system quick to install and easy to operate. This makes the airClient TOTAL 241 well positioned to connect cities and rural towns at an unbeatable per subscriber cost.

Additionally sB3415 is well suited for other commercial applications such as rural business connectivity (example petrol stations and grocery shops needing credit card transactions), less bandwidth demanding industrial applications such as telemetry or central office to satellite office connectivity.

airClient TOTAL 241 [sB3415] Technical Specifications

RADIO PARAMETERS
Model No	sB3415-03
Radio Frequency Bands	License Exempt ISM: 2.400 - 2.485 GHz
Wireless Modulation	Orthogonal Frequency Divisional Multiplexing (OFDM) - QPSK, 16QAM, 64QAM Direct Sequence Spread Spectrum (DSSS) - DBPSK, DQPSK, CCK Self-adapting modulation to maintain optimal link performance under different environmental conditions
Data Rates	54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 and 1 Mbps Depending on the wireless link quality
Typical Transmit Output Power (EIRP) with Internal Antenna (dBm)	+33 to 15 dBm max @ 6 Mbps, +29 to 15 dBm max @ 54 Mbps
Typical Receive Sensitivity with Internal Antenna (dBm)	-109 @ 1 Mbps (8% PER), -87 @ 54 Mbps (10% PER) Self-adapting, depending on the radio modulation
Typical Transmit Output Power at the External N Connector (dBm)	+18 to 0 @ 1 Mbps, +14 to 0 @ 54 Mbps
Typical Receive Sensitivity at the External N Connector (dBm)	-94 @ 1 Mbps, -71 @ 54 Mbps Self-adapting, depending on the radio modulation
RF Interference Mitigation	DFS (IEEE 802.11h), Tight Spectral Mask
RF Channels	13 channels (20 MHz channel width at 5 MHz spacing)
Wireless Error Correction	FEC, ARQ
OPERATIONAL PARAMETERS
Standards Compliance	IEEE 802.11 b/g and 802.11d
Recommended Link Distance	FCC For Point – Point link [EIRP limit : 48 dBm]: 5 km (3.1 miles) using integrated 15 dBi CPE Antenna on both ends 40 km (25 miles) using External 27 dBi Antenna on both ends For Point – Multi-Point link [EIRP limit : 36 dBm]: 15 km (9.3 miles) using 17 dBi Sector AP Antenna and 24 dBi CPE Antenna 4 Km (2.5 miles) using 12 dBi integrated Sector AP Antenna and integrated 15 dBi CPE Antenna ETSI [EIRP limit : 20 dBm] 3 km (1.9 miles) using 17dBi Sector AP Antenna and integrated 15 dBi CPE Antenna
Operating Modes	Router, NAT or Bridge
Typical Useful Throughput^#	Up to 3Mbps of TCP and UDP traffic (Upgradable to 6 Mbps in the steps of 1 Mbps)
Bandwidth Management	Bandwidth control on the wireless and wired interface in 1kbps increment
Maximum Packet Size (MTU)	1532 bytes
NETWORK MANAGEMENT AND SECURITY
Traffic Prioritization (QoS)^{^}	8 configurable individual priority queues (IEEE 802.11e) for voice, video and data traffic gives multimedia traffic capability with low latency and low jitter. Priority queues can be reused as SLAs for MAC or IP based Bandwidth management on wireless interfaces
Data Security	IEEE 802.11i/Robust Security Network and WEP 64/128
Network Support	DHCP Client and Relay
Antenna Alignment Tools	RSSI (Radio Signal Strength Indicator) graph
Diagnostic and Performance Management Tools	Remote firmware upgrade, Integrated Link Budget, Device Discovery tool, Radio and Ethernet Traffic Statistics, Configurable Syslog reports
Management Interface	Web based management, SNMP based monitoring and Network Management System
VLAN support	Supports Management VLAN, user VLAN, and VLAN pass through
Network Management System (NMS)	Easy integration with 3rd party NMS. Application note and scripts available for MRTG.
PHYSICAL, ENVIRONMENTAL AND COMPLIANCE PARAMETERS
Network Connection	One RJ45 connector (IEEE 802.3 compliant 10/100 BaseT with Auto MDI/MDX)
Integrated Antenna	15 dBi Gain with Beam width 27º/30º (V/H)
External Antenna Connection	One N (Female) Bulkhead Connector (50 Ohm)
PoEI Adaptor (Included) [sB2842]	Remote radio hardware reset capability. Input: 100V to 250V AC, 47-63 Hz; Output: 48V DC, 0.4A, 18 Watts
Power Consumption	48V, 200mA (7W), with Power over Ethernet Injector (PoEI)
LED Indicators	Ultra bright LEDs for outdoor viewing of RF and Ethernet activity
Radio Operating Environment	-22ºF to +140ºF (-30ºC to +60ºC) 20% to 90% non-condensing humidity; outdoor rated
Enclosure	Outdoor rated UV stabilized plastic (IP 65 rated)
Mounting Accessory (Included)	Complete swivel mounting kit for installation on wall or pole
Dimensions and Weight	Shipping: 12" x 12" x 6" (305 x 305 x 152 mm), approx. 7.28 lb (3.3 kg) Unit (without mounting accessory): 11.1" x 11.2" x 2.4" (280 x 285 x 60 mm), approx. 4.45 lb (2.1 kg)
Certifications	USA: FCC 47 CFR Part 15C, Section 15.247, 15.407 - FCC ID: PWG CLIENT Europe: ETSI 301 893, CE! Marked, WEEE compliance Canada: RSS 139

Related products
airClient TOTAL 551 [sB3416]
airClient 241 [sB3417]

Buy this product

Enquire about this product

Successful deployment stories

Last updated on Monday, July 14, 2008